Smart Plug Buying Guide: Compatibility, Safety and Costs

What a smart plug can and can't do

A smart plug sits between a wall outlet and a device. It switches power on or off from an app, a voice assistant, a schedule or an automation. That makes it useful for lamps, fans, holiday lights, certain coffee makers with a physical on switch and similar devices that simply need power to start working, but only when the appliance manufacturer permits automated or unattended switching.

A smart plug cannot press buttons for you. If an appliance returns to standby when power is restored, or needs a button press to start, switching the plug on will not start it. A smart plug also cannot make an unsafe appliance safe to run unattended.

Good and poor uses for a smart plug

Smart plugs work best with simple devices that start working as soon as they receive power. Good candidates include table and floor lamps, string lights, fans with a mechanical switch left in the on position when their manufacturer permits automated switching, and chargers you want to switch off overnight. Poor candidates include high-load heating appliances, devices that need a clean shutdown such as computers or network storage, medical equipment, and anything that could cause a hazard if it switched on while nobody was home. When in doubt, check the appliance manual for guidance on timers or remote switching.

Match the plug to the appliance

Check the smart plug's voltage, current and wattage ratings against the appliance's label and the manufacturer's instructions. Motors, heaters and other high-load devices may have special restrictions or startup surges. Never exceed ratings or use a plug with an appliance the manufacturer prohibits.

• Read both labels: the appliance's rating plate and the plug's maximum load. Leave a comfortable margin rather than running close to the limit.
• Space heaters: the U.S. Consumer Product Safety Commission advises plugging portable electric heaters directly into a wall outlet, never using an extension cord or power strip, and never leaving a heater running unattended. Avoid using smart plugs with portable heaters; follow the heater manufacturer's instructions. A smart plug's wattage rating alone does not make remote or unattended heater operation safe.
• Safety certification: in the United States, look for a mark from a nationally recognized testing laboratory, such as UL or ETL. Other countries have their own safety marks and plug standards, so buy a plug designed for your country.
• Outdoor use: use only plugs rated for outdoor use outside, and follow the manufacturer's instructions on weather exposure.

Check the size and shape

Some smart plugs are bulky enough to block the second socket on a wall outlet. If you need both sockets, look for a compact design. Multi-outlet smart power strips are another option, but check the overall load rating and the manufacturer's guidance. If you want to control a ceiling light or a hard-wired fixture, a smart plug is the wrong tool; a smart switch is designed for that and should be installed by a qualified person following local electrical rules.

Choose how it connects

How a smart plug connects determines whether you need extra hardware:

• Wi-Fi: connects directly to your router, so no hub is usually needed. Most Wi-Fi smart home devices only support the 2.4 GHz band, so make sure that band is enabled.
• Matter over Wi-Fi: uses your Wi-Fi network but is set up through a Matter controller, such as a compatible smart speaker, display, streaming device or platform controller. A phone app alone does not necessarily provide the controller functionality required by your chosen platform.
• Matter over Thread: uses Thread, a low-power mesh network, and needs a Thread border router. Border routers are built into some smart speakers, displays, streaming devices and Wi-Fi routers. Look for a "Requires Border Router" note on the box.
• Zigbee or Z-Wave: needs a compatible hub or controller that supports that protocol.
• Bluetooth only: usually controlled from a nearby phone, with limited remote access unless paired with a hub.

For a deeper explanation, read Do Smart Plugs Need a Hub? and Matter vs. Thread: What's the Difference? If you have already decided on Matter, see our shortlist of the best Matter smart plugs.

Choose the right smart-home ecosystem

Check compatibility with the voice assistant or home platform you already use. Matter support can improve interoperability, but specific features may still depend on the platform, controller and network setup. Confirm whether a hub or Thread border router is needed for the model you choose.

Matter devices support multi-admin, which lets you share one device with more than one compatible platform, such as a manufacturer's app and a voice assistant. Setup typically uses a QR code or numeric setup code. Our free Smart Home Compatibility Checker can help you work out what your current setup supports.

Weighing TP-Link's two brands? See Kasa vs. Tapo for how their apps and Matter support differ.

Decide whether internet-free control matters

Some smart plugs depend on a cloud service for remote access or automations; others support local control. If you want schedules to keep working during an internet outage, verify that behavior in the manufacturer's documentation rather than assuming it. Matter is designed for local control on your home network, but controlling Matter devices while you are away from home still requires an internet-connected controller.

Also check what the plug does after a power cut. Some plugs return to their previous state, some stay off and some let you choose. For a freezer, aquarium pump or anything that must stay on, a plug that turns off after an outage could be a problem.

Look at privacy and security

Prefer brands with clear update policies, secure account options and transparent privacy documentation. Update firmware when available and use strong, unique account credentials. A separate network for connected devices can be useful if your router supports it. Check whether the app requires an account, what data it collects and whether you can remove the device from your account if you sell or give it away.

Energy monitoring

Energy-monitoring plugs may help measure consumption, but the measurements and accuracy vary by product. They can be useful for spotting devices that draw power on standby or for estimating running costs. Treat the readings as estimates, and avoid assuming automation will always reduce energy use.

Calculate real costs

Compare the upfront price with any optional paid features. Prices change often, so compare current listings rather than relying on a fixed figure. In general:

• Basic plugs: on/off control, schedules and voice assistant support. Often sold in multi-packs.
• Mid-range plugs: may add Matter support, energy monitoring, a compact design or local control.
• Specialty plugs: outdoor-rated, multi-outlet or higher-load models cost more and are worth it only when you need those features.

Remember to include any hub, Matter controller or Thread border router you would need to buy if you don't already have one.

Example smart plug to consider

TP-Link Kasa Smart Plug Mini EP25

The Kasa EP25 is a compact Wi-Fi smart plug to compare if you want to schedule or remotely control suitable small household devices, such as a lamp. Before purchasing, check its current platform compatibility, Wi-Fi requirements, electrical rating and whether it fits your outlet without blocking an adjacent socket. The EP25 should not be assumed to support Matter or Apple Home solely because other Kasa models do; verify the exact listing and manufacturer specifications.

Affiliate disclosure: As an Amazon Associate, Everyday Tech Guide earns from qualifying purchases. We may earn a commission if you purchase through the link below, at no additional cost to you.

View the Kasa Smart Plug Mini EP25 on Amazon (affiliate link) →

We have not independently tested this product. Pricing, availability and specifications can change; confirm the details on the product listing.

More smart plugs to compare

Affiliate disclosure: As an Amazon Associate, Everyday Tech Guide earns from qualifying purchases. If you purchase through the links below, we may earn a commission at no additional cost to you.

Kasa KP125M Matter smart plug (2-pack)

A slim Matter-over-Wi-Fi plug with energy monitoring in the Kasa app. It uses 2.4 GHz Wi-Fi and needs a Matter controller for Matter setup; TP-Link's datasheet states that energy monitoring is not supported in the Apple Home app. The linked listing is a two-pack.

View the Kasa KP125M 2-pack on Amazon (affiliate link) →

TP-Link Tapo P125M Matter smart plug

A compact Matter-over-Wi-Fi plug designed to leave the neighboring outlet free. It connects over 2.4 GHz Wi-Fi and works through Matter with Apple Home, Alexa, Google Home and SmartThings, so no Thread border router is needed.

View the TP-Link Tapo P125M on Amazon (affiliate link) →

TP-Link Tapo P400M outdoor Matter smart plug

An outdoor Matter-over-Wi-Fi plug with two individually controlled outlets for string or landscape lights. Check its weather-resistance rating, electrical rating and outlet cover requirements in TP-Link's specifications before installing outdoors.

View the TP-Link Tapo P400M on Amazon (affiliate link) →

For a deeper comparison of Matter options, see Best Matter Smart Plugs.

We have not independently tested these smart plugs. Specifications are from the manufacturers; prices and availability may change, so check each listing for current details.

Set up safely

Follow the device's setup instructions and local electrical rules. Do not connect smart plugs to power strips or extension cords in ways prohibited by the manufacturer. For critical appliances, consider what happens after a power outage or network failure.

During setup, follow the manufacturer's pairing steps; some devices use Bluetooth or Matter commissioning rather than requiring your phone to join the plug's Wi-Fi band. If setup fails on a Wi-Fi plug, confirm the 2.4 GHz band is on and that you entered the right Wi-Fi password. If Wi-Fi itself is unreliable in that room, our Home Wi-Fi Solution Finder and router buying guide can help.

Frequently asked questions

Do smart plugs need a hub?

It depends on how the plug connects. Most Wi-Fi smart plugs connect directly to your router. Matter over Wi-Fi plugs need a Matter controller, such as a compatible smart speaker, display or phone app. Matter over Thread plugs also need a Thread border router, and Zigbee or Z-Wave plugs need a compatible hub.

Can I use a smart plug with a space heater?

Avoid smart plugs with portable heaters and follow the heater manufacturer's instructions; wattage compatibility alone is not enough to establish safety. The U.S. Consumer Product Safety Commission advises plugging portable heaters directly into a wall outlet, never using an extension cord or power strip, and never leaving a heater running unattended, which remote switching can encourage.

Do smart plugs work on 5 GHz Wi-Fi?

Many do not. Most Wi-Fi smart home devices only support the 2.4 GHz band, so make sure your router's 2.4 GHz network is turned on and check the plug's specifications before buying.

Will my smart plug work if the internet goes down?

It depends on the product. Some plugs need a cloud service for app control, schedules or voice commands, while others, including many Matter devices, can be controlled locally on your home network. Remote control from outside your home generally still requires an internet connection. Check the manufacturer's documentation.

Can I use one smart plug with Alexa, Google Home and Apple Home at the same time?

Matter devices support multi-admin, which lets you share a device with more than one Matter-compatible platform. Non-Matter plugs depend on which platforms the manufacturer supports. Even with Matter, specific features can vary by platform.